Everything You Need to Know About Circuit Breaker Repair in North Scottsdale, AZ

December 1, 2016 2:16 am Published by Leave your thoughts

Did you know that circuit breakers are a vital part of every home? Do you know how they work, or when they may need circuit breaker repair in North Scottsdale, AZ? Let’s dive into all of those questions in the easiest way possible.

Before we begin, you should learn some basic terms that a layman might have heard before, but may not fully grasp. Keep in mind that these definitions are rudimentary:

  • Voltage: Voltage is the force that makes an electric charge move.
  • Current: Current is the rate at which that charge is moving through the conductor.
  • Resistance: Each conductor has a certain amount of resistance to the current. The resistance of the conductor depends on its size.

These three things are all related. You can’t change one without changing the other two. Current equals voltage divided by resistance. All right, now that we’re done with that, let’s find out how all those terms relate to your home and factor into circuit breaker repair in North Scottsdale, AZ.

What does a circuit breaker do?

So, besides being recognizable as those switches in the gray box, a circuit breaker is a vital mechanism in any home or business. If there’s too much current flowing through the electrical wiring in a home, the breaker cuts the power. It’s a fairly simple device, but without a circuit breaker, fires would be much more common than they are today.

How does a circuit breaker work?

All of the switches in your circuit breaker are connected to an electromagnet. The wire that has electricity running through it (the hot wire) is connected to both sides of the switch. When the switch is open, electricity is free to flow through the electromagnet, and eventually through the wire. Conversely, if the switch is closed, electricity can’t flow.

Since electricity powers the electromagnet, it’s able to flip the switch if there’s ever too much electricity flowing through the wires. Thus, the switch will turn off and power will be cut, avoiding any hazards. When a switch flips like that, it’s known as tripping.

What do you do after the circuit breaker trips?

If power ever suddenly goes out in a room, it could be the circuit breaker letting you know that there was too much electricity flowing, and it was a danger. The breaker tripped itself to stop the current, thus protecting you from a potential fire. Walk to the electric panel and check to see if any of the switches have been flipped to the “off” position. If that’s the case, flip them back to “on” and you should be good to go.

What if that doesn’t work?

If flipping the switch back to “on” doesn’t do anything, you’ll need to call an electrician for circuit breaker repair in North Scottsdale, AZ. Only a professional electrician will be able to find the root cause of the problem and fix the issue. He’ll most likely need to replace the faulty circuit breaker, and that is absolutely something you should not attempt on your own.

Contact Eavenson Electric Co. if you find yourself in need of an expert to fix your circuit breaker!

Categorised in:

This post was written by Writer

Leave a Reply

Your email address will not be published. Required fields are marked *