LED Retrofitting: How to Convert from Fluorescent to LED

August 17, 2020 11:36 pm Published by Leave your thoughts

If you’re a homeowner or business owner in the North Scottsdale area who is still operating with old-fashioned fluorescent bulbs or tubes, you are doing yourself a grave disservice. LED bulbs are infinitely better than the alternatives, across the board. They use less energy. They provide brighter, healthier light at the source. When they break, they don’t expose users to toxic mercury, like fluorescent bulbs. LED lights even last 10 to 15 times longer than regular fluorescent bulbs.

In short, making the switch to LEDs saves you money on replacements and your monthly utility bills, even as it keeps your family from potential harm. Best of all, LED retrofitting in North Scottsdale, AZ doesn’t have to cost an arm and a leg.

If you’re thinking about making the switch, here are some factors to consider.

Safety first

Before you dive in, it’s worth taking the time to consider the dangers of working with electricity. If you’re not careful, you could end up having a very bad day. To avoid mishaps, make sure you have high-quality eye safety gear and insulated gloves. When you begin, make sure to work slowly to prevent any accidents.

If you have never done any electrical work before, you should seriously consider having a veteran work alongside you on LED retrofitting in Scottsdale, AZ.

Turn off the power

Make sure you have a multimeter on hand so you can be sure that your power source is operating between 120 and 277 volts (depending on your specific location). Once you are confident that your power source is adequate, you should turn off the power, and then disconnect the power supply from your fluorescent fixture.

Begin wiring

Remove the fluorescent fixture, being sure to note the location of the live wire and the positive and negative leads. Once you’ve removed your fluorescent fixture, it’s time to wire your new LED lights. Attach the positive lead to your live wire. Then, wire the negative lead to your live wire. Secure both connections with electrical wire nuts. Finally, reconnect the power.

Skip the hassle!

When it comes right down to it, hiring a professional electrician could end up saving you a lot of trouble in the long run. Before you invest in the safety gear and the tools, and before you take up your friends’ or family members’ valuable time, think about the potential savings to be had by calling in someone who’s highly qualified to do the work for you.

When you call Eavenson Electric Co. for your LED retrofitting project in Scottsdale, AZ, you can rest assured that you’re getting top-flight service from a team with decades of on-the-job experience. Since 1985, Eavenson Electric Co. has established a reputation for excellence in commercial and residential electrical work alike. We do it all! When you need help with circuit breaker repair, electrical wiring in new construction, ceiling fan installation and everything in between, you can count on Eavenson Electric Co. Pick up the phone and give us a call today. We can’t wait to hear from you!

Categorised in:

This post was written by Writer

Leave a Reply

Your email address will not be published. Required fields are marked *